Learn how to Setup UsingBluetooth on your Sony SmartBand. For your SmartBand to work, it must be connected to your Android device and the latest versions of the following applications must be installed on the Android device: Smart Connect, SmartBand and Lifelog.
- If you set up your SmartBand using NFC, you are guided during setup to Google Play, from where you can install the necessary applications to use with your SmartBand.
- If you set up your SmartBand using Bluetooth, you have to go through some extra steps to install the necessary applications from Google Play and connect to your Android device.
- The Smart Connect application is pre-installed on all Android devices from Sony Mobile at purchase. Make sure that you update it to the latest version.
- After the SmartBand application is installed, it is not located on the Application screen. You can access it under Devices in the Smart Connect application after your SmartBand is connected to the Android device.
To set up your SmartBand using Bluetooth
- Make sure that your SmartBand has been charged for at least 30 minutes.
- Android device: Make sure you have installed or updated the Smart Connect application to the latest version from Google Play.
- Turn on your SmartBand.
- Android device: Turn on the Bluetooth function, then scan for Bluetooth devices and select SWR10 in the list of available devices.
- Start the Smart Connect application.
- Follow the instructions to install the SmartBand application and the Lifelog application. – icon appears in the status bar when the SmartBand is connected.
Note
All applications required for the SmartBand to work are available on Google Play.
